Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S ECO 778TE BC30 - ASA - INEOS Styrolution

Material Data Center offers the following functions for Luran® S ECO 778TE BC30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luran S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Carbon Footprint Reduction vs Fossil-Based (3rd party validated): 39 % (ISO 14044)
Attributed Content of ISCC-certified Bio-Circular Sources (min.): 30 %
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 5 cm³/10min ISO 1133
温度 220 °C -
荷重 10 kg -
成形収縮率, 平行 0.6 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 2500 MPa ISO 527
降伏応力 54 MPa ISO 527
降伏ひずみ 3.4 % ISO 527
破壊呼びひずみ 8 % ISO 527
曲げ弾性率, 23°C 2450 MPa ISO 178
曲げ強さ 80 MPa ISO 178
シャルピー衝撃強さ, +23°C 220 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 15 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 4 kJ/m² ISO 179/1eA
Ball indentation hardness 85 MPa ISO 2039-1
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 103[ann.] °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 106[ann.] °C ISO 75-1/-2
ビカット軟化温度, B 104 °C ISO 306
線膨張係数, 平行 95 E-6/K ISO 11359-1/-2
Other Standards[S]
熱伝導率, ソリッド 0.17 W/(m K) DIN 52612-1
S: These properties are reported by the producer according standards that are different to our defaults.  ann.: annealed
その他の特性.値単位テスト基準
吸水率. 1.65 % Sim. to ISO 62
吸湿率 0.35 % Sim. to ISO 62
密度. 1070 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Processing Recommendation Extrusion値単位テスト基準
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 - 4 h -
樹脂温度 200 - 250 °C -
特殊な特性
成形加工法.
異形押出成形., シート押出成形., その他の押出成形.
納入形状.
ペレット.
特殊な特性.
高耐衝撃及び耐衝撃改良., 紫外線安定化., 熱安定化.
耐薬品性
General Chemical Resistance
Certifications
Contains renewable resources, ISCC Plus
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.